Zipp 404 Firecrest Tubeless Disc Brake Road Bike Wheels

The Zipp 404 Firecrest Tubeless Disc Brake wheels are made for speed! Whether you're in a road race, time trial, triathlon, granfondo or just training, the Zipp 404 makes sure you go fast. The 58 mm high tubeless-ready rim is aerodynamic and stable in crosswinds thanks to the ABLC Sawtooth 'golf ball' profile, which creates an airflow around the rim.

As the rims are Tubeless Ready, it's possible to ride without inner tubes once you've installed the tubeless rim tape, tubeless outer tubes and latex. Riding Tubeless reduces rolling resistance and increases comfort, grip and puncture resistance. The Zipp ZR1 hubs, developed in Germany, are the focal point of the 404 Firecrest Tubeless Disc Brake wheels. These hubs roll extremely smoothly, have well-sealed industrial bearings and engage quickly due to a 6-pawl body with 66 engagement points.

The rims and hub are held in place by the reliable and aerodynamic Sapim CX-Sprint J-bend spokes. If you are looking for a wheel set that can be used for both training and racing, the Zipp 404 Firecrest Tubeless Disc Brake should be high on your list!

Zipp ZR1 hubs
At the heart of these Zipp wheels is a durable hub set that was designed in Germany; the Zipp ZR1. This hub features well-sealed industrial bearings with extremely low rolling resistance. The rear hub has a body with 66 touch points for a quicker response when you start pedalling.

Zipp Lifetime Warranty
The Zipp Lifetime Warranty gives you a lifetime warranty against manufacturing defects. This gives you ultimate security! The warranty becomes active after registration of your wheel(s) with Zipp and is non-transferable.

TSE (Total System Efficiency Technology)
Zipp focused on just one thing with Total System Efficiency Technology - more speed! The innovative rim lay-up ensures lower air resistance, less rolling resistance, lower weight, less vibration and increased durability.

Tubeless ready
The Zipp Tubeless Ready rim facilitates tubeless riding at lower pressures. This results in a larger contact area with the ground for more grip and agility on descents and when riding in wet conditions. In addition, comfort is increased and rolling resistance reduced by riding with a tubeless setup.

Hookless rims
Zipp 404 Firecrest Tubeless Disc Brake rims are designed without hooks to hold the edge of the tyre. The pressure of your inner tube combined with the edge of the special hookless-compatible outer tubes ensure that the tyre stays in place. This allows you to mount wider tyres, and you will experience less resistance. In short: more comfort and higher speed!

ABLC SawTooth
The Advanced Boundary Layer Control design consists of Zipp's signature golf ball structure. This allows the airflow to be directed along the surface of the rim for optimum aerodynamics. It also improves stability for greater comfort.

RollingRoad Test Protocol
Zipp continually optimises its wheels in the wind tunnel and through computer simulation. However, Zipp realizes that the real world is the best environment in which to test a wheel. Altogether, this is Zipp's RollingRoad Test Protocol. A more convex rim was developed, which merges with the tyre. This gives you even more stability and less air resistance. It also makes it easier for your bike to keep speed and less energy is lost. Because the rim is wider, you can mount even wider tyres. With a larger tyre volume and lower tyre pressure, vibration is reduced, which causes less fatigue on long rides.

- Zipp 404 Firecrest Tubeless Disc Brake wheels
- Tubeless Tyre Tape
- Tubeless Valves
- Centerlock Lock ring
- End-caps for thru-axle